BR-ADS Adjustable Sub
The BR-ADS Adjustable Sub allows the distance between two pieces of equipment to be adjusted per downhole requirements prior to placing equipment.
BR-AOD Annulus Operated Tubing Drain
The BR-AOD Annulus Fluid Drain Valve provides a means for communication between the tubing and the annulus.
BR-TOD Tubing Operated Drain Valve
The BR-TOD Tubing Fluid Drain Valve provides a means for communication between the tubing and the annulus.
BR-CSR Casing Scraper
The Casing Scraper is used to remove scale and debris from the casing ID. The use of the scraper helps to ensure that tools can properly run and set in casing.
BR-T2 On Off Tool with Stinger
The BR-T2 On Off Tool with Stinger is a fully machined, weld-free tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug.
BR-EXP Model A Expansion Joint
(Swivel Type)
The BR-EXP Model A Expansion Joint (Swivel Type) is used to allow expansion and contraction during injection or production operations.
BR-EXP Model B Expansion Joint
(Spline Type)
The BR-EXP Model B Expansion Joint (Spline Type) is used to allow expansion and contraction during injection or production operations.
BR-EXP Model C Expansion Joint
(Clutch-Style)
The BR-EXP Model C Expansion Joint (Clutch-Style) is used to allow expansion and contraction during injection or production operations.
BR-POP Pump Out Plug
The BR-POP Pump Out Plug is available with a variety of threads allowing installation to the bottom of the tubing string to isolate the tubing from the annulus.
BR-SJR Safety Joint
(Rotational type)
The BR-SJR Safety Joint (Rotational type) allows positive release of the tubing string in completions where retrieval problems are anticipated.
BR-SOSJ Safety Joint
(Shear Type)
The BR-SOSJ Safety Joint (Shear Type) allows positive release of the tubing string in completions where retrieval problems are anticipated.
BR-COU Control Unit
The Control unit (Tubing Centrilizer) is designed for use with downhole tool accessories such as stinger subs for plug and retainers.
BR-AS-IDXS Indexing Sub
The BR-AS-IDXS Indexing Sub is designed to work with D&L Seal Bore Packers.
BR-AS-BS Blast Joint
Blast joints are thick-walled tubular components normally utilized in completionsand located adjacent to changes in the tubing ID oracross from perforations.
BR-AS-FC Flow Coupling
Flow couplings are thick-walled tubular components normally utilized in completions and located adjacent to changes in the tubing ID or across from perforations.
BR-AS-PUP Joint
Flow couplings are thick-walled tubular components normally utilized in completions and located adjacent to changes in the tubing ID or across from perforations.
BR-AS-PPUP Perforated Joint
Flow couplings are thick-walled tubular components normally utilized in completions and located adjacent to changes in the tubing ID or across from perforations.
Brighatech Needle Clamp
The Brighatech's Needle Clamp is light weight and easy to handle which makes using it to shut off high pressure pit-hole leaks simple and sensible.
Brighatech Swab Cups
Brighatech offers swab cups in various designs to meet the many well conditions seen in today’s oil and gas industry.