TORA Composite Frac Plug

The TORA Composite Frac Plug isolate the formation above the plug for fracturing operations in both single and multiple-zone stimulation applications, allowing flow back through the body for pressure equalization or production. Available for casing sizes from 3-1/2 to 7 inch, the TORA Composite Frac Plug comes with your choice of integra-ball frac plug or a floating top ball in most sizes. The top-ball design provides a larger flow area for higher return rates while the internal design keeps the ball in place inside the plug. The flexibility of these tools saves operational time while protecting sensitive formations.

TORA Composite Frac Plug excel in stacked applications, achieving reliable operation and rapid drill out using conventional drilling operations, including coil tubing drilling motors. TORA Composite Frac Plug can be run on tubing, drillpipe, coiled tubing, or wireline using conventional frac plug setting equipment.

Can be set using Baker 10 or 20 depending on plug size

Features

• Temperature rating - 300º F.
• Pressure rating up to 10,000-psi.
• Holds full differential pressure from above and allows flow through the mandrel from below.
• Beveled bottom prevents body from spinning, minimise drill out time.
• Allows multiple plugs to be run to isolate a series of zones.
• Allows back flow through the body for equalization or production.